8″ SB20PFCR30-4 / Paper

PRODUCT COMPARISON

Categories: , , ,

Features

  • Vented reinforced plastic chassis
  • Proprietary cone material with natural fibers made in-house
  • Soft low damping rubber surround for improved transient response
  • Large spider for improved linearity
  • Optimized motor system
  • Vented coil former for low compression
  • Non-resonant long life lead wires

Specs

  • Nominal Impedance 4 Ω
  • DC resistance, Re 3.4 Ω
  • Voice coil inductance, Le 0.71 mH
  • Effective piston area, Sd 216 cm2
  • Voice coil diameter 30.5 mm
  • Voice coil height 16.5 mm
  • Air gap height 5 mm
  • Linear coil travel (p-p) 11.5 mm
  • Magnetic flux density 1.2 T
  • Magnet weight 0.54 kg
  • Net weight 1.42 kg
  • Free air resonance, Fs 34 Hz
  • Sensitivity (2.83V/1m) 92.5 dB
  • Mechanical Q-factor, Qms 2.78
  • Electrical Q-factor, Qes 0.37
  • Total Q-factor, Qts 0.33
  • Moving mass incl. air,Mms 22.4 g
  • Force factor, Bl 6.6 Tm
  • Equivalent volume, Vas 66.2 liters
  • Compliance, Cms 1.0 mm/N
  • Mechanical loss, Rms 1.7 kg/s
  • Rated power handling* 50 W

* IEC 268-5, T/S parameters measured on drive units that are broken in.