6½″ SATORI MW16PF-8 / Paper

Remark:

To be discontinued from standard product range, available to OEM minimum order quantity 250 pcs.

Features

  • Vented aerodynamic cast aluminium chassis for  optimum strength and low compression.
  • Proprietary cone material with EGYPTIAN  PAPYRUS™ fibres made in-house.
  • Soft low damping rubber surround for optimum  transient response.
  • Advanced BIMAX spider for improved linearity.
  • Non-conducting fibre glass voice coil former for  minimum damping.
  • Extended copper sleeve on pole piece for low  inductance and reduced distortion.
  • CCAW voice coil for reduced moving mass.
  • Long life silver lead wires attached 180° apart for improved stability.
  • Vented pole piece and coil former for reduced compression.
  • Low piston to chassis diameter ratio.
  • Gasket and bolt hole protrusions for reduced coupling to speaker cabinet.

Specs

  • Nominal Impedance 8 Ω
  • DC resistance, Re 6.2 Ω
  • Voice coil inductance, Le 0.2 mH
  • Effective piston area, Sd 119 cm2
  • Voice coil diameter 36 mm
  • Voice coil height 17 mm
  • Air gap height 6 mm
  • Linear coil travel (p-p) 11 mm
  • Magnetic flux density 0.9 T
  • Magnet weight 0.54 kg
  • Net weight 1.42 kg
  • Free air resonance, Fs 29 Hz
  • Sensitivity (2.83 V / 1 m) 87 dB
  • Mechanical Q-factor, Qms 4.7
  • Electrical Q-factor, Qes 0.42
  • Total Q-factor, Qts 0.38
  • Moving mass incl. air, Mms 12.5 g
  • Force factor, Bl 5.8 Tm
  • Equivalent volume, VAS 48.4 liters
  • Compliance, Cms 2.45 mm/N
  • Mechanical loss, Rms 0.5 kg/s
  • Rated power handling* 60 W

* IEC 268-5, T/S parameters measured on drive units that are broken in.