e9553bfbfce0fc0ed33d9118b724a35e

6″ SB17NRXC35-4 / Paper

Features

  • Vented cast aluminum chassis for optimum strength and low compression
  • Proprietary cone material with natural fibers made in-house
  • Soft low damping rubber surround for transient response
  • Non-conducting fiber glass voice coil former for minimum damping
  • Extended copper sleeve on pole piece for low inductance and low distortion
  • CCAW voice coil for reduced moving mass
  • Long life silver lead wires
  • Vented pole piece for reduced compression

Specs

  • Nominal Impedance 4 Ω
  • DC resistance, Re 3.1 Ω
  • Voice coil inductance, Le 0.13 mH
  • Effective piston area, Sd 118 cm2
  • Voice coil diameter 35.5 mm
  • Voice coil height 16 mm
  • Air gap height 5 mm
  • Linear coil travel (p-p) 11 mm
  • Magnetic flux density 1.0 T
  • Magnet weight 0.54 kg
  • Net weight 1.56 kg
  • Free air resonance, Fs 35 Hz
  • Sensitivity (2.83 V / 1 m) 92 dB
  • Mechanical Q-factor, Qms 5.5
  • Electrical Q-factor, Qes 0.34
  • Total Q-factor, Qts 0.32
  • Moving mass incl. air, Mms 11.6 g
  • Force factor, Bl 4.8 Tm
  • Equivalent volume, VAS 35.2 liters
  • Compliance, Cms 1.78 mm/N
  • Mechanical loss, Rms 0.46 kg/s
  • Rated power handling* 60 W

* IEC 268-5, T/S parameters measured on drive units that are broken in.