6.5in SATORI MR16PNW-8

6½” SATORI MR16PNW-8 / Paper

Features

  • Vented aerodynamic cast aluminium chassis for optimum strength and low compression.
  • Proprietary cone material with EGYPTIAN PAPYRUS™ fibres made in-house.
  • Soft low damping rubber surround for optimum transient response.
  • Advanced BIMAX spider for improved linearity.
  • Powerful optimized low distortion neodymium motor system.
  • Non-conducting fibre glass voice coil former for minimum damping.
  • Extended copper sleeve on pole piece for low inductance and reduced distortion.
  • CCAW voice coil for reduced moving mass.
  • Long life silver lead wires attached 180° apart for improved stability.
  • Vented pole piece and coil former for reduced compression.
  • High piston to chassis diameter ratio.
  • Gasket and bolt hole protrusions for reduced coupling to speaker cabinet.
  • Mode balanced cone for reduced break-up.

Specs

  • Nominal Impedance 8 Ω
  • DC resistance, Re 6.2 Ω
  • Voice coil inductance, Le 0.11 mH
  • Effective piston area, Sd 119 cm2
  • Voice coil diameter 35.5 mm
  • Voice coil height 11.2 mm
  • Air gap height 5 mm
  • Linear coil travel (p-p) 6.2 mm
  • Magnetic flux density 1.17 T
  • Magnet weight (NEO) 0.13 kg
  • Net weight 1 kg
  • Free air resonance, Fs 32 Hz
  • Sensitivity (2.83 V / 1 m) 88 dB
  • Mechanical Q-factor, Qms 5.11
  • Electrical Q-factor, Qes 0.32
  • Total Q-factor, Qts 0.3
  • Moving mass incl. air, Mms 10.6 g
  • Force factor, Bl 6.5 Tm
  • Equivalent volume, VAS 44.3 liters
  • Compliance, Cms 2.3 mm/N
  • Mechanical loss, Rms 0.4 kg/s
  • Rated power handling* 30 W

* IEC 268-5, high-pass Butterworth, 200 Hz, 12 dB/oct.