5in SATORI MR13P-8

5″ Satori MR13P-8 / Paper

Features

  • Vented aerodynamic cast aluminium chassis for optimum strength and low compression.
  • Proprietary cone material with EGYPTIAN PAPYRUS™ fibres made in-house.
  • Soft low damping rubber surround for optimum transient response.
  • Advanced BIMAX spider for improved linearity.
  • Powerful optimized low distortion neodymium motor system.
  • Non-conducting fibre glass voice coil former for minimum damping.
  • Extended copper sleeve on pole piece for low inductance and reduced distortion.
  • CCAW voice coil for reduced moving mass.
  • Long life silver lead wires attached 180° apart for improved stability.
  • Vented pole piece and coil former for reduced compression.
  • High piston to chassis diameter ratio.
  • Gasket and bolt hole protrusions for reduced coupling to speaker cabinet.

Specs

  • Nominal Impedance 8 Ω
  • DC resistance, Re 6.8 Ω
  • Voice coil inductance, Le 0.11 mH
  • Effective piston area, Sd 70 cm2
  • Voice coil diameter 30.5 mm
  • Voice coil height 11 mm
  • Air gap height 5 mm
  • Linear coil travel (p-p) 6 mm
  • Magnetic flux density 1.08 T
  • Magnet weight 0.1 kg
  • Net weight 0.78 kg
  • Free air resonance, Fs 45 Hz
  • Sensitivity (2.83 V / 1 m) 88 dB
  • Mechanical Q-factor, Qms 4.25
  • Electrical Q-factor, Qes 0.33
  • Total Q-factor, Qts 0.31
  • Moving mass incl. air, Mms 6.0 g
  • Force factor, Bl 6.1 Tm
  • Equivalent volume, VAS 12.5 liters
  • Compliance, Cms 1.86 mm/N
  • Mechanical loss, Rms 0.4 kg/s
  • Rated power handling* 30 W

* IEC 268-5, high-pass Butterworth, 200 Hz, 12 dB/oct.